The Smart BatteryProtect disconnects the battery from non-essential loads before it is completely discharged (which would damage the battery) or before it has insufficient power left to crank the engine.

When using Bluetooth to program the Smart BatteryProtect any required engage / disengage levels can be set.
Alternatively, one of nine predefined engage / disengage levels can be set with the programming pin (see manual).

If required, Bluetooth can be disabled.

The Smart BatteryProtect is a uni-directional device. It can only deal with current in one direction, so either current to a load, or current from a charger, but not both currents at the same time. In addition to this, current only can only flow from the IN terminal to the OUT terminal. In case of use with a load, the battery connects to the IN terminal, and in case of use with a charger, the charger connects to the IN terminal.

A cable to connect Digital Multi Control, Phoenix Inverter Control, Interface MK3-USB, VE.Bus connections between multiple VE.Bus devices and to make VE.Bus and VE.Can connections to a GX device.

This splitter is used to connect the MultiPlus 500VA - 1600VA range in parallel and 3 phase configurations, or in other installations where multiple VE.Bus ports are required.

0

Red
With chrome frame.
Chrome frame Ø: 155 mm
Mounting hole Ø: 113.5 mm
Built-in depth: 32.5 mm
Screw hole: 4.5 mm
Voltage: 24 V
Cable: 2.5 m
IP-class: IP67

Clear
With chrome frame.
Chrome frame Ø: 155 mm
Mounting hole Ø: 113.5 mm
Built-in depth: 32.5 mm
Screw hole: 4.5 mm
Voltage: 24 V
Cable: 0.5 m
IP-class: IP67

REVERSE CAMERA SYSTEM 5.6" MONITOR AND MINI SHUTTER CAMERA

Monitor 5.6" with touch buttons on the front. Possibility to connect up to four cameras. Sun protection and brackets included. Remote control included. Can be mounted with all cable-connected cameras from GVP in the 55763x series.

Technical specification:
Drive voltage: 10-32 V
Power consumption: Max 6 W
Speaker, type: Built-in Speaker, output power: 1 W
Wireless transmission: No
Resolution: 640 x 480
Color depth: 24 bit
Contrast: 500:1
Brightness: 200 cd/m2
Outer dimensions HxWxD: 128 x 169.8 x 31.5 mm
Reverse camera wiring: 5-pin (1 connection)
Wiring side/front camera: 4-pin (3 connections)



Camera with automatic motorized lens protection. The lens cover opens when the camera is switched on. Automatic heating of the camera lens when the temperature drops below 10°C. Equipped with IR sensor for night vision.

Technical specification:
Drive voltage: 12-24 V through 5-pin connection cable
Camera wide angle: 150 degrees
Recording quality: 1/3”CCD (SHARP)
Motorized visor: Yes
Automatic heating: Yes
Temperature range: -20 - +70
Protection class: IP69K
Connection: 5-pin cable
Dimensions (WxHxD): 110x85x80



Extension cable for HD reversing camera system with 4-pin connection. Length 15 m

Set include monitor 10.1", backcamera with motorized visor and 20m 5PIN cable.
Included: 557721, 557730, 55779520

Dimensions (WxH): 565 x 196 x 1 mm
Design: Aluminum
Approved according to ECE 70-1.

Dimensions (WxH): 565 x 196 x 1 mm
Design: Self-adhesive
Approved according to ECE 70-1.

Dimensions (WxH): 285 x 196 x 1 mm
Design: Aluminum
Approved according to ECE 70-1.

Dimensions (WxH): 285 x 196 x 1 mm
Design: Self-adhesive
Approved according to ECE 70-1.

Dimensions (WxH): 565 x 132 x 1 mm
Design: Self-adhesive
Approved according to ECE 70-1.

Dimensions (WxH): 285 x 132 x 1 mm
Design: Self-adhesive
Approved according to ECE 70-1.

Dimensions (WxH): 1130 x 196 x 1 mm
Design: Self-adhesive
Approved according to ECE 70-1.

Dimensions (WxH): 1130 x 132 x 1 mm
Design: Aluminum
Approved according to ECE 70-1.

Dimensions (WxH): 1130 x 132 x 1 mm
Design: Self-adhesive
Approved according to ECE 70-1.