This Type 2 EV charging cable allows you to quickly and easily charge your car at any public or home charging point. If you ever go to a hotel, private parking, business center, or shopping mall you will most likely notice that there is a charging station (wallbox) but there is no cable attached to it- you have to bring your own. This is where the Type 2 EV cables come in handy.

Our EV charger cable comes neatly packed in a carrying bag with a microfiber towel included.

No need to worry about compatibility issues- our electric car charging cable is compatible with all EVs that have a Type 2 (SAE J3068) charging port. Our EV cable has all the necessery certification to ensure its safe usage. This charging cable can endure a wide temperature range (-30°C to 50°C) and has a heat-resistant construction that offers safe outside charging for your car. This EV charging cable Type 2 will work safely on all electric car chargers, even the ones with inferior or superior charging power. The charging power will be limited either by the cable, the station, or the car. It has an IP55 waterproof grade.

Specifications:

Protection level: IP55
Fire retardant level: UL94V-0
Rated Current: 16A/ 32A
Rated Voltage: 250V/ 480V
Rated Frequency: 50/60Hz
Insulation resistance: >100M ohm (DC 500V)
Terminal temperature rise: 45N

Tired of rolling long and heavy cables? This is the right EV cable for you- easy to carry, store, and use thanks to its coiled design. This Type 2 EV charging cable allows you to quickly and easily charge your car at any public or home charging point. If you ever go to a hotel, private parking, business center, or shopping mall you will most likely notice that there is a charging station (wallbox) but there is no cable attached to it- you have to bring your own. This is where the Type 2 EV cables come in handy.

Our EV charger cable comes neatly packed in a carrying bag with a microfiber towel included.

No need to worry about compatibility issues- our electric car charging cable is compatible with all EVs that have a Type 2 (SAE J3068) charging port. Our EV cable has all the necessery certification to ensure its safe usage. This charging cable can endure a wide temperature range (-30°C to 50°C) and has a heat-resistant construction that offers safe outside charging for your car. This EV charging cable Type 2 will work safely on all electric car chargers, even the ones with inferior or superior charging power. The charging power will be limited either by the cable, the station, or the car. It has an IP55 waterproof grade.

Specifications:
Protection level: IP55
Fire retardant level: UL94V-0
Rated Current: 16A/ 32A
Rated Voltage: 250V/ 480V
Rated Frequency: 50/60Hz
Insulation resistance: >100M ohm (DC 500V)
Terminal temperature rise: 45N

The most common socket type in Europe is Schuko (two pins). This mobile electric car charger is suitable for almost every home/ garage in Europe and has charging power of up to 3.6 kW at 16A.

With the press of a button, you can adjust the current between 8A, 10A, 13A and 16A to suit your needs.

Our EV charger comes neatly packed in a carrying bag with a microfiber towel included.

This charging station has been designed with several safety elements to ensure secure operation. It is CE and TÜV certified and has 7 different electrical protections: Leakage-, Over/under-voltage, Lightning-, Over-current-, Ground-, Over-heat- and Surge protection. Our 3.6 kW EV charger also has an IP65 protection rate.

The charger has a 2.8" color LCD screen that displays metrics such as current, temperature, energy consumed, voltage, total time charging, and power. You can also set a delay timer for up to 12 hours.

Specifications:

Protection level: IP65
Rated Power: 1.7-3.6kW
Input Power: 250V max
RCD protection: 30mA AC
Fire retardant level: UL94V-0
Rated Current: 16A
Rated Voltage: AC200-250V
Rated Frequency: 50/60Hz
Insulation resistance: >100M ohm (DC 500V)
Terminal temperature rise: 45N

This EV charger is equipped with an LED display that provides information about 6 different metrics: current (A), voltage (V), charging power (kW), consumed energy (kWh), working temperature, and charging time.

The charger also has a delay timer which can start charging your car up to 10 hours after plugging it in.

We understand how important safety is when it comes to electricity. Our charger is CE and TÜV certified and has 6 different protections against leakage, under-voltage, lightning, over-voltage, overload, and over-temperature. It also has Type A+DC 6mA RCD. Protection level of IP65. Comes with a 2-year warranty.

Neatly packed in a carrying bag.

What's included:
22 kW/ 11 kW Portable Charger
Storage Bag
Cleaning Cloth
Manual
Wall Stand

Specifications:

RCD: Type A 30mA AC
Working Voltage: 380V~440V
Max Power: 11 kW
Connector: IEC 62196 (Type 2)
Input Frequency: 50Hz/ 60Hz
Max Current: 16A
IP Rating: IP65
Impact of external force: 1m drop and 2T vehicle run over pressure

0

The EV Charging Station has three-phase and single-phase capabilities. It delivers a maximum of 22kW AC in three-phase or 7.3kW in single-phase mode.

It has a built-in LCD touch screen for monitoring and control directly from the charging station. Initial setup, configuration and monitoring is done from VictronConnect via Bluetooth and/or the integrated web interface via a WiFi Access Point or a WiFi LAN.

The EV Charging Station can be fully integrated with and remotely controlled via a Victron Energy GX Device and VRM.


Not only does this EV Charging Station fully integrate with a Victron Energy GX device and VRM, if you have solar (within the Victron ecosystem), it can also be set up to allow excess energy from the sun to directly charge your vehicle. Manual and scheduled modes offer even more flexibility to respond to the needs of the EV depending on the system.


It has a fully programmable RGB light ring around the charging port that displays different light effects depending on the current status (disconnected, charging, charged, etc.) to quickly determine the device status.

The EV Charging Station NS has three-phase and single-phase capabilities. It delivers a maximum of 22kW AC in three-phase or 7.3kW in single-phase mode.

The device is technically identical to the EV Charging Station, but with a new, modern design available in 3 colours and without the built-in LCD screen. Initial setup, configuration and monitoring is done from VictronConnect via Bluetooth and/or the integrated web interface via a WiFi Access Point or a WiFi LAN.

The charger can be fully integrated with and remotely controlled via a Victron Energy GX Device and VRM.

Not only does this EV Charging Station NS fully integrate with a Victron Energy GX device and VRM, if you have solar (within the Victron ecosystem), it can also be set up to allow excess energy from the sun to directly charge your vehicle. Manual and scheduled modes offer even more flexibility to respond to the needs of the EV depending on the system.

It has a fully programmable RGB light ring around the charging port that displays different light effects depending on the current status (disconnected, charging, charged, etc.) to quickly determine the device status.

A smart charger with user authentication, RFID and if several chargers are connected in one line - also load balancing. Also allows to adapt the power to the electrical grid conditions. These models are up to 22 kW with Type 2 socket or 5 meters long cable and Type 2 plug. The owner can adjust max charging power in a web application if needed. MCharger Connected provides user management with up to 128 user accounts with 2 RFID cards per user. You can see each user’s charging patterns and get full overview of the charging history and export it as a PDF file.

Charging power up to 22 kW - RFID authentication - User management with charging history - WiFi, LAN - Web application - Load balancing incl. prioritization - Static and dynamic power limitation

No matter which electric car you prefer, MCHARGER wallbox provides an easy charging experience. From simple installation process to user friendly interface with the color display. Choose the MCHARGER model that fits your needs, add our smartly designed accessories and enjoy the advantages of E-mobility to the fullest!

Wallbox with the Type 2 cable.

Charging power 11 kW
Color display
IP54 protection
Overvoltage protection
Easy installation
Electrical connection available from the back, top, or the bottom
Certified the CE, RoHS, WEEE, IEC
Developed and manufactured in Germany

No matter which electric car you prefer, MCHARGER wallbox provides an easy charging experience. From simple installation process to user friendly interface with the color display. Choose the MCHARGER model that fits your needs, add our smartly designed accessories and enjoy the advantages of E-mobility to the fullest!

Wallbox with the Type 2 cable.

Charging power up to 22 kW
Color display
IP54 protection
Overvoltage protection
Easy installation
Electrical connection available from the back, top, or the bottom
Certified the CE, RoHS, WEEE, IEC
Developed and manufactured in Germany

EV Charging station NS itself must be purchased separately.