Auxiliary driving lights cable for a 1 lamp with 3-pin DT connector. Maximum power of 300 W, cable length 3 m. 2 mm² cable. Complete with 40 A relay, relay socket, fuse, switch. 24 V.

Auxiliary driving lights cable for a 1 lamp with 3-pin DT connector. Maximum power of 300 W, cable length 3 m. 2 mm² cable. Complete with 40 A relay, relay socket, fuse, switch. 24 V.

Auxiliary driving lights cable for a 1 lamp with 2-pin DT connector. Maximum power of 300 W, cable length 3 m. 2 mm² cable. Complete with 40 A relay, relay socket, fuse, switch. 24 V.

Auxiliary driving lights cable for 3 lamps with 2-pin DT connector. Maximum power of 300 W, cable length 3 m. 2 mm² cable. Complete with 40 A relay, relay socket, fuse, switch. 12 V.

The Smart BatteryProtect disconnects the battery from non-essential loads before it is completely discharged (which would damage the battery) or before it has insufficient power left to crank the engine.

When using Bluetooth to program the Smart BatteryProtect any required engage / disengage levels can be set.
Alternatively, one of nine predefined engage / disengage levels can be set with the programming pin (see manual).

If required, Bluetooth can be disabled.

The Smart BatteryProtect is a uni-directional device. It can only deal with current in one direction, so either current to a load, or current from a charger, but not both currents at the same time. In addition to this, current only can only flow from the IN terminal to the OUT terminal. In case of use with a load, the battery connects to the IN terminal, and in case of use with a charger, the charger connects to the IN terminal.

Auxiliary driving lights cable for 3 lamps with 2-pin DT connector. Maximum power of 300 W, cable length 3 m. 2 mm² cable. Complete with 40 A relay, relay socket, fuse, switch. 24 V.

Store packaged relaykit för 12 V drivinglight. Complete with connection cable for 2 drivinglight. Relay 30 A, fuse15 A.

Complete cable kit with relay and cables. Relay 40 A , fuse 15 A.

Cambuckle straps in blister packs. 2 pcs/pack. 3.5 m. Orange.

Cambuckle straps in blister packs. 2 pcs/pack. 4.0 m. Black.

This all-new communication-centre allows you to always have perfect control over your system from wherever you are and maximises its performance. Simply connect through our Victron Remote Management (VRM) portal, or access directly, using the separate GX Touch, a MFD or our VictronConnect App thanks to its added Bluetooth capability. This latest addition to the GX-range combines all the best of connectivity, redefining smart power solutions in every way. Watch the new video that explains all there is to know about installing the new Cerbo GX & GX Touch 50.

This all-new communication-centre allows you to always have perfect control over your system from wherever you are and maximises its performance. Simply connect through our Victron Remote Management (VRM) portal, or access directly, using the separate GX Touch, a MFD or our VictronConnect App thanks to its added Bluetooth capability. This latest addition to the GX-range combines the best of connectivity, redefining smart power solutions in every way. Watch the new video that explains all there is to know about installing the new Cerbo GX & GX Touch 50. Cerbos-S is w/o tank level and temperature sensor inputs

For 12V or 24V batteries. Charging current: 30 A. Charge controller for advanced 12 or 24 V systems. Ultra-fast Maximum Power Point Tracking (MPPT). Advanced Maximum Power Point Detection in case of partial shading conditions. Outstanding conversion efficiency. Natural convection cooling. Automatic battery voltage recognition. Flexible charge algorithm. Battery over-discharge protection. Over temperature protection and power derating when temperature is high. Direct for communicating with other devices. Bluetooth connection possible via dongle. Programming, real-time data and history display by Color Control GX or other GX devices or smartphone or other Bluetooth-enabled device (VE.Direct Bluetooth Smart dongle needed).

A remote on-off switch for the Skylla-TG Charger.

This Type 2 EV charging cable allows you to quickly and easily charge your car at any public or home charging point. If you ever go to a hotel, private parking, business center, or shopping mall you will most likely notice that there is a charging station (wallbox) but there is no cable attached to it- you have to bring your own. This is where the Type 2 EV cables come in handy.

Our EV charger cable comes neatly packed in a carrying bag with a microfiber towel included.

No need to worry about compatibility issues- our electric car charging cable is compatible with all EVs that have a Type 2 (SAE J3068) charging port. Our EV cable has all the necessery certification to ensure its safe usage. This charging cable can endure a wide temperature range (-30°C to 50°C) and has a heat-resistant construction that offers safe outside charging for your car. This EV charging cable Type 2 will work safely on all electric car chargers, even the ones with inferior or superior charging power. The charging power will be limited either by the cable, the station, or the car. It has an IP55 waterproof grade.

Specifications:

Protection level: IP55
Fire retardant level: UL94V-0
Rated Current: 16A/ 32A
Rated Voltage: 250V/ 480V
Rated Frequency: 50/60Hz
Insulation resistance: >100M ohm (DC 500V)
Terminal temperature rise: 45N

Tired of rolling long and heavy cables? This is the right EV cable for you- easy to carry, store, and use thanks to its coiled design. This Type 2 EV charging cable allows you to quickly and easily charge your car at any public or home charging point. If you ever go to a hotel, private parking, business center, or shopping mall you will most likely notice that there is a charging station (wallbox) but there is no cable attached to it- you have to bring your own. This is where the Type 2 EV cables come in handy.

Our EV charger cable comes neatly packed in a carrying bag with a microfiber towel included.

No need to worry about compatibility issues- our electric car charging cable is compatible with all EVs that have a Type 2 (SAE J3068) charging port. Our EV cable has all the necessery certification to ensure its safe usage. This charging cable can endure a wide temperature range (-30°C to 50°C) and has a heat-resistant construction that offers safe outside charging for your car. This EV charging cable Type 2 will work safely on all electric car chargers, even the ones with inferior or superior charging power. The charging power will be limited either by the cable, the station, or the car. It has an IP55 waterproof grade.

Specifications:
Protection level: IP55
Fire retardant level: UL94V-0
Rated Current: 16A/ 32A
Rated Voltage: 250V/ 480V
Rated Frequency: 50/60Hz
Insulation resistance: >100M ohm (DC 500V)
Terminal temperature rise: 45N

The Color Control GX is the communication-centre of your installation. It offers at-a-glance live information, and lets you control all products connected to it. Full system control is gained - almost anywhere in the world - by accessing your Color Control GX using our free-to-use Victron Remote Management Portal (VRM).

Comfort Mat FELTON (2nd layer) is a professional sound-absorbing material, made of special acoustic felt of high density using thermal bonding technology. The material is also protected by a non-woven fabric.
Sound absorption is up to 80% in a wide frequency range, used as a 2nd and 3rd layer of noise insulation. Protected from moisture and mold.

Thickness – 10 mm,
Sheet size – 700 x 1000 mm,
Sheet weight – 0,78 kg,
Weight – 1,11 kg/m2,
Water proof glue – YES.

Place to use:
Used as a 2nd layer.

Hood
External metal part of doors
Roof
Wheel arches
Engine firewall
Interior floor
Trunk floor

Comfort Mat TSUNAMI (2nd/3rd layer) is an updated product in Comfort Mat Expert range of materials. It is an acoustic foam AcoFoam II, made on the basis of a mixture of synthetic rubbers, 18 mm thick with a strong sealant type adhesive.

The material is designed for installation on the external “panel” of the door, for professional high-quality acoustic preparation of the door volume. Eliminates negative and acoustic phenomena: reflection, standing waves, superposition of waves one on top of another (“ECHO” effect). It greatly improves the sound quality of acoustic speakers, and is also an excellent noise isolator.

Thickness – 18 mm,
Sheet size – 350 x 500 mm,
Adhesion – 5-8 N / cm,
Water proof material – YES;
Water proof glue – YES.

Place to use:
Used as a 2nd or 3rd layer

Doors/Wheels arches