Video interface adapter allow the display of the installed analog parking camera (with RCA-CINCH connector) on the display of the original radio (from the factory).

Suitable for cars:

FORD C-max (2019->)
FORD Ecosport (2019->)
FORD Fiesta (7/2019->)
FORD Focus (2019->)
FORD Galaxy (2019->)
FORD Kuga (2019->)
FORD Mondeo (2019->)
FORD Mustang (2019->)
FORD Puma II. (9/2019->)
FORD Ranger (2019->)
FORD S-max (2019->)
FORD Tourneo Custom (2019->)
FORD Transit Custom (2019->)
for cars with oem Sync3 system (3.0 / 3.2 / 3.3 version) with 7"/8" screen and new 32-pin Ford plug

Touchscreen with HD picture qiality. Connect up to total 4 cameras. On screen all cameras can be shown at same time. Sunshield, brackets and remote are included.

HD quality provides significantly sharper and clearer picture.

Rear view camera universal, option to set as front/rear camera, to switch the guide lines on/off, 140° view angle, installation in the licence plate light area, or within the side mirror. The angle of inclination is adjustable in the 45° range.

Parameters:

CMOS 1/4"
lens diameter 6mm
Electronic Aperture: 1/50 1/10000 sec.
Minimum lighting: 0.1Lux
signal-to-noise ratio:> 48dB
TV system: NTSC
TV lines: 420
IP protection: IP68
sensing angle: 140°
video output: 1.0V / 75Ohm
white balance: automatically
operating temperature from -30 °C to + 70 °C
signal cable length 7m terminated CINCH connectors
power cable: 1m
power supply: 12V DC
consumption:

AV extension cable 20m, contains the wire for receiving a signal.

0

Touchscreen with HD picture qiality. Connect up to total 4 cameras. On screen all camera can be shown at time. Sunshield, brackets and remote are included.

HD quality provides significantly sharper and clearer picture.

Touchscreen with HD picture qiality. Connect up to total 4 cameras. On screen one camera can be shown at time. Sunshield, brackets and remote are included.

HD quality provides significantly sharper and clearer picture.

Touchscreen with HD picture qiality. Connect up to total 4 cameras. On screen one camera can be shown at time. Sunshield, brackets and remote are included.

HD quality provides significantly sharper and clearer picture.

REVERSE CAMERA SYSTEM 5.6" MONITOR AND MINI SHUTTER CAMERA

Monitor 5.6" with touch buttons on the front. Possibility to connect up to four cameras. Sun protection and brackets included. Remote control included. Can be mounted with all cable-connected cameras from GVP in the 55763x series.

Technical specification:
Drive voltage: 10-32 V
Power consumption: Max 6 W
Speaker, type: Built-in Speaker, output power: 1 W
Wireless transmission: No
Resolution: 640 x 480
Color depth: 24 bit
Contrast: 500:1
Brightness: 200 cd/m2
Outer dimensions HxWxD: 128 x 169.8 x 31.5 mm
Reverse camera wiring: 5-pin (1 connection)
Wiring side/front camera: 4-pin (3 connections)



Camera with automatic motorized lens protection. The lens cover opens when the camera is switched on. Automatic heating of the camera lens when the temperature drops below 10°C. Equipped with IR sensor for night vision.

Technical specification:
Drive voltage: 12-24 V through 5-pin connection cable
Camera wide angle: 150 degrees
Recording quality: 1/3”CCD (SHARP)
Motorized visor: Yes
Automatic heating: Yes
Temperature range: -20 - +70
Protection class: IP69K
Connection: 5-pin cable
Dimensions (WxHxD): 110x85x80



Extension cable for HD reversing camera system with 4-pin connection. Length 15 m

Set include monitor 10.1", backcamera with motorized visor and 20m 5PIN cable.
Included: 557721, 557730, 55779520

RCA Reduction female-female, for connection of 2 video/audio cables.