For 12 V batteries. Output power: 2000 VA. Charging current: 80 A and 1 A. AC current: 35 A.
MultiPlus is a powerful true sine wave inverter, a sophisticated battery charger that features adaptive charge technology and a high-speed AC transfer switch in a single compact enclosure. Up to six Multis can operate in parallel to achieve higher power output. In addition to parallel connection, three units can be configured for three-phase output. Also PowerControl for dealing with limited generator, shore side or grid power and PowerAssist for boosting the capacity of shore or generator power.

The MultiPlus, as the name suggests, is a combined inverter and charger in one elegant package. Its many features include a true sine wave inverter, adaptive charging, hybrid PowerAssist technology, and several system integration features.

Use this cable to connect the following products to the VE.Bus BMS:
- Skylla-TG all models
- Battery Protect models BP40i, BP60i and BP200i (all discontinued).
The cable translates the remote on/off driver logic from the VE.Bus BMS (normally high, and open circuit in case of alarm) to the logic needed by above products: active pull down to switch off.

Number sign lighting LED 12-24V, 2 m cable.
Housing: ABS plastic
Lens: Polycarbonate
Diods: 4 x 1 W
Voltage: 12 - 24 V
Dimensions (LxBxD): 72 x 50 x 41 mm
IP-class: IP67
Cable: 2 m

OZZ WR1 65 work / reverse and warning ligh with ECE R23, R10, R65 certification

Discover the OZZ WR1 65 reversing light with integrated warning light. The lamp is ECE R23 approved as a reversing light, and the integrated warning light is certified according to ECE R65 class 1 & 2. The reversing light, combined with the powerful integrated warning light, enhances your vehicle’s safety in all situations.

Designed to harmonize with OZZ’s other lighting range, the OZZ WR1 65 has a modern aesthetic that complements your vehicle.
With 2700 lumens and 1 lux at a range of 65 meters, it guarantees excellent rear visibility. Moreover, OZZ WR1 65 is equipped with adjustable mounts for easy installation, making it an optimal choice for all types of vehicles. The certifications for this product include ECE R10, R148 (R23), and R65 Class 1 and 2.


Lamp type: LED
Diodes: 4 pcs
Voltage: 10-32V DC
Actual effect: 12V 36 W
Actual effect: 24V 36 W
Nominal current at 12 V: 3 A
Nominal current at 24 V: 1,5 A
Theoretical lumen (Lm): 3600
Actual lumen: 2700
1 lux @ 65 m
Kelvin (K): 5000
IP-class: IP68/69K
Beam pattern: Flood
Position light: No
Warning light: Yes, amber
Connection: 4-pin DT
Cable lenght (mm): 800
Material chassi, lens: aluminum, polycarbonate
Lenght, depth, height (mm): 164, 70/74, 45/60
Operating temperature: -40 - +60°C
E-mark approval: R148 (R23), R65 Class 1 and 2 EMC ECE R10
Weight (kg): 0,56

OZZ WR1 work / reverse ligh with ECE R23, R10 certification

Discover OZZ WR1, a prominent reverse light with ECE R23 certification. This lamp is designed to enhance safety for you and your vehicle in all conditions. Designed to harmonize with OZZ’s other lighting range, the OZZ WR1 has a modern aesthetic that complements your vehicle. With 2220 lumens and 1 lux at a range of 95 meters, it guarantees excellent rear visibility.

Moreover, OZZ WR1 is equipped with adjustable mounts for easy installation, making it an optimal choice for all types of vehicles. The certifications for this product include ECER10, R148 (R23).


Lamp type: LED
Diodes: 4 pcs
Voltage: 10-32V DC
Actual effect: 12V 36 W
Actual effect: 24V 36 W
Nominal current at 12 V: 3 A
Nominal current at 24 V: 1,5 A
Theoretical lumen (Lm): 3600
Actual lumen: 2220
1 lux @ 95 m
Kelvin (K): 5000
IP-class: IP68/69K
Beam pattern: Flood
Position light: No
Warning light: No
Connection: 2-pin DT
Cable lenght (mm): 800
Material chassi, lens: aluminum, polycarbonate
Lenght, depth, height (mm): 164, 70/74, 45/60
Operating temperature: -40 - +60°C
E-mark approval: R148 (R23)
EMC ECE R10
Weight (kg): 0,5

DC-DC converter for powering of 24 V appliances from 12 V supply. Overload and overheating protection. Completely encapsulated: waterproof, shockproof and ignition protected. Water, oil or dirt will not damage the Orion IP67 DC-DC Converter. The casing is made of cast aluminium and the electronics are moulded in resin.

DC-DC converter for powering of 12 V appliances from 24 V supply.
Remote on/off eliminates the need for a high current switch in the input wiring. The remote on/off can be operated with a low power switch or by for example the engine run/stop switch (see manual).

DC-DC converter for powering of 12 V appliances from 24 V supply.
Overload and overheating protection. Completely encapsulated: waterproof, shockproof and ignition protected. Water, oil or dirt will not damage the Orion IP67 DC-DC Converter. The casing is made of cast aluminium and the electronics are moulded in resin.

DC-DC converter for powering of 12 V appliances from 24 V supply.
Overload and overheating protection. Completely encapsulated: waterproof, shockproof and ignition protected. Water, oil or dirt will not damage the Orion IP67 DC-DC Converter. The casing is made of cast aluminium and the electronics are moulded in resin.

DC-DC converter for powering of 12 V appliances from 24 V supply.
Overload and overheating protection. Completely encapsulated: waterproof, shockproof and ignition protected. Water, oil or dirt will not damage the Orion IP67 DC-DC Converter. The casing is made of cast aluminium and the electronics are moulded in resin.

DC-DC converter for powering of 12 V appliances from 24 V supply.
Overload and overheating protection. Completely encapsulated: waterproof, shockproof and ignition protected. Water, oil or dirt will not damage the Orion IP67 DC-DC Converter. The casing is made of cast aluminium and the electronics are moulded in resin.

DC-DC converter for powering of 12 V appliances from 24 V supply.
All models with adjustable output can also be used as a battery charger. For example, to charge a 12 Volt starter or accessory battery in an otherwise 24V system. All models with adjustable output can be paralleled to increase output current. Up to five units can be connected in parallel.
Remote on/off eliminates the need for a high current switch in the input wiring. The remote on/off can be operated with a low power switch or by for example the engine run/stop switch (see manual).

DC-DC converter for powering of 24 V appliances from 12 V supply.
All models with adjustable output can also be used as a battery charger. For example, to charge a 24 Volt starter or accessory battery in an otherwise 12 V system. All models with adjustable output can be paralleled to increase output current.
Up to five units can be connected in parallel.

DC-DC converter for powering of 24 V appliances from 12 V supply.
All models with adjustable output can also be used as a battery charger. For example, to charge a 24 Volt starter or accessory battery in an otherwise 12 V system. All models with adjustable output can be paralleled to increase output current. Up to five units can be connected in parallel.
Remote on/off eliminates the need for a high current switch in the input wiring. The remote on/off can be operated with a low power switch or by for example the engine run/stop switch (see manual).

RDC-DC converter for powering of 24 V appliances from 12 V supply.

DC-DC converter for powering of 12 V appliances from 48 V supply. Short circuit proof and can be paralleled to increase output current. An unlimited number of units can be connected in parallel. IP43 protection when installed with the screw terminals oriented downwards. Screw terminals - no special tools needed for installation.
Remote on/off eliminates the need for a high current switch in the input wiring. The remote on/off can be operated with a low power switch or by for example the engine run/stop switch (see manual).

DC-DC converter for powering of 12 V appliances from 24 V supply.
All models with adjustable output can also be used as a battery charger. For example, to charge a 12 Volt starter or accessory battery in an otherwise 24V system. All models with adjustable output can be paralleled to increase output current.
Up to five units can be connected in parallel.
Remote on/off eliminates the need for a high current switch in the input wiring. The remote on/off can be operated with a low power switch or by for example the engine run/stop switch (see manual).