Kit with SmartStart™ control -
Get into a warm car with ice-free windows and a fully charged battery all winter long. Set your own heating times with the SmartStart™ control unit.

The WarmUp II 1400 SmartStart™ kit includes a Termini™ II 1400 interior heater, a MultiCharger 1205R Flex battery charger, a SmartStart™ remote control timer and required cables. Note! The engine heater must be ordered separately. Find the right heater for your car here.

Features – WarmUp II 1400 SmartStart™:
Set two daily departure times
Multiple heating options: 1 to 4h or automatic heating based on the outside temperature
24h repeat
Weekend program
Calendar function
Manual ON/OFF
Monitor battery status
Possibility for two users with individual settings
Oversleep function, keeps the car warm for 2 hours after chosen pick-up time

Kit with SmartStart™ control -
Get into a warm car with ice-free windows and a fully charged battery all winter long. Set your own heating times with the SmartStart™ control unit.

The WarmUp II 1900 SmartStart™ kit includes a Termini™ II 1900 interior heater, a MultiCharger 1205R Flex battery charger, a SmartStart™ remote control timer and required cables. Note! The engine heater must be ordered separately. Find the right heater for your car here.

Features – WarmUp II 1900 SmartStart™:
Set two daily departure times.
Multiple heating options: 1 to 4h or automatic heating based on the outside temperature.
24h repeat.
Weekend program.
Calendar function.
Manual ON/OFF.
Monitor battery status.
Possibility for two users with individual settings.
Oversleep function, keeps the car warm for 2 hours after chosen pick-up time.

To measure the power and energy of the whole application at the distribution box. Or to measure the output of a PV Inverter, to display the data on the Color Control GX and the VRM Portal.

To measure the power and energy of the whole application at the distribution box. Or to measure the output of a PV Inverter, to display the data on the Color Control GX and the VRM Portal.

To measure the power and energy of the whole application at the distribution box. Or to measure the output of a PV Inverter, to display the data on the Color Control GX and the VRM Portal.

To measure the power and energy of the whole application at the distribution box. Or to measure the output of a PV Inverter, to display the data on the Color Control GX and the VRM Portal.

The DEFA PlugIn extension cable is used when installing DEFA WarmUp and ComfortKits for connection of engine- and interior heaters. Connectors: male - female, an armored, plastic coated and flexible tube that protects the wires from heat, as well as mechanical and chemical wear.

Cable length [m]: 0.5
Voltage [V]: 250
Fuse [A]: 16
Conductor cross-section [mm²]: 1.5
IP rating [IP]: 44
Certification: EN 50066-1, EN 60309-1.

The DEFA PlugIn extension cable is used when installing DEFA WarmUp and ComfortKits for connection of engine- and interior heaters. Connectors: male - female, an armored, plastic coated and flexible tube that protects the wires from heat, as well as mechanical and chemical wear.

Cable length [m]: 1,0
Voltage [V]: 250
Fuse [A]: 16
Conductor cross-section [mm²]: 1.5
IP rating [IP]: 44
Certification: EN 50066-1, EN 60309-1.

The DEFA PlugIn extension cable is used when installing DEFA WarmUp and ComfortKits for connection of engine- and interior heaters. Connectors: male - female, an armored, plastic coated and flexible tube that protects the wires from heat, as well as mechanical and chemical wear.

Cable length [m]: 2,0
Voltage [V]: 250
Fuse [A]: 16
Conductor cross-section [mm²]: 1.5
IP rating [IP]: 44
Certification: EN 50066-1, EN 60309-1.

The DEFA PlugIn extension cable is used when installing DEFA WarmUp and ComfortKits for connection of engine- and interior heaters. Connectors: male - female, an armored, plastic coated and flexible tube that protects the wires from heat, as well as mechanical and chemical wear.

Cable length [m]: 5,0
Voltage [V]: 250
Fuse [A]: 16
Conductor cross-section [mm²]: 1.5
IP rating [IP]: 44
Certification: EN 50066-1, EN 60309-1.

The 2 meter extension cable is an accessory of the Blue Smart IP65 Charger with DC connector.

Round extra light rods for all extra lights. Length 280 mm. Can be cut individually for the best fit. Mounting details included.

Powder coated extra light holder for two extra lights.
Easily attached behind the number plate.
Adapted for two 9 "extra lights.

Extra light holder for three extra lights. Easily attached behind the number plate.

The Filax has been designed to switch sensitive loads, such as computers or modern entertainment equipment from one AC source to another. The priority source typically is the mains, a generator or shore power. The alternate source typically is an inverter. With its switching time of less than 20 milliseconds, sensitive loads will continue to operate without disruption. The Filax is not intended to supply high power household equipment like washing machines or electric motors.

Extremely thin flash light bar:

Height: 25 mm / 0.96”
Length: 1070 mm / 42”
Power supply: 12-24 V
Diods: 36 + 144 LED
Power: 98 W / 4,08 A @ 24 V
Working temperature: -40 - +65 ºC
Connection: 5 m ADR-cable
IP Classification: IP67
Approval: CISPR25 CLASS 3, SAE J845, ECE R65 CLASS 2, ECE R10

Winner of the Red Dot Design Award!

The extremely slim design is perfect for mounting on today's aerodynamic vehicles, it gives you less wind noise and reduces fuel consumption.
Possibility to choose between 14 different flashing patterns/modes.
Connection through four cables, red (+), black (ground), yellow (change of flashing pattern), white (day/night function).

Supplied with brackets.

Ordered separately:
Remote control: Art. no. 584949.
Simple holder for remote control: Art. no. 584949H

Extremely thin flash light bar:

Height: 25 mm / 0.96”
Length: 1230 mm / 48”
Power supply: 12-24 V
Diods: 36 + 168 LED
Power: 106 W / 4,42 A @ 24 V
Working temperature: -40 - +65 ºC
Connection: 5 m ADR-cable
IP Classification: IP67
Approval: CISPR25 CLASS 3, SAE J845, ECE R65 CLASS 2, ECE R10

Winner of the Red Dot Design Award!

The extremely slim design is perfect for mounting on today's aerodynamic vehicles, it gives you less wind noise and reduces fuel consumption.
Possibility to choose between 14 different flashing patterns/modes.
Connection through four cables, red (+), black (ground), yellow (change of flashing pattern), white (day/night function).

Supplied with brackets.

Ordered separately:
Remote control: Art. no. 584949.
Simple holder for remote control: Art. no. 584949H

Extremely thin flash light bar:

Height: 25 mm / 0.96”
Length: 1375 mm / 54”
Power supply: 12-24 V
Diods: 36 + 192 LED
Power: 114 W / 4,75 A @ 24 V
Working temperature: -40 - +65 ºC
Connection: 5 m ADR-cable
IP Classification: IP67
Approval: CISPR25 CLASS 3, SAE J845, ECE R65 CLASS 2, ECE R10

Winner of the Red Dot Design Award!

The extremely slim design is perfect for mounting on today's aerodynamic vehicles, it gives you less wind noise and reduces fuel consumption.
Possibility to choose between 14 different flashing patterns/modes.
Connection through four cables, red (+), black (ground), yellow (change of flashing pattern), white (day/night function).

Supplied with brackets.

Ordered separately:
Remote control: Art. no. 584949.
Simple holder for remote control: Art. no. 584949H

Extremely thin flash light bar:

Height: 25 mm / 0.96”
Length: 1530 mm / 60”
Power supply: 12-24 V
Diods: 36 + 216 LED
Power: 122 W / 5,08 A @ 24 V
Working temperature: -40 - +65 ºC
Connection: 5 m ADR-cable
IP Classification: IP67
Approval: CISPR25 CLASS 3, SAE J845, ECE R65 CLASS 2, ECE R10

Winner of the Red Dot Design Award!

The extremely slim design is perfect for mounting on today's aerodynamic vehicles, it gives you less wind noise and reduces fuel consumption.
Possibility to choose between 14 different flashing patterns/modes.
Connection through four cables, red (+), black (ground), yellow (change of flashing pattern), white (day/night function).

Supplied with brackets.

Ordered separately:
Remote control: Art. no. 584949.
Simple holder for remote control: Art. no. 584949H

Extremely thin flash light bar:

Height: 25 mm / 0.96”
Length: 1830 mm / 72”
Power supply: 12-24 V
Diods: 36 + 264 LED
Power: 138 W / 5,75 A @ 24 V
Working temperature: -40 - +65 ºC
Connection: 5 m ADR-cable
IP Classification: IP67
Approval: CISPR25 CLASS 3, SAE J845, ECE R65 CLASS 2, ECE R10

Winner of the Red Dot Design Award!

The extremely slim design is perfect for mounting on today's aerodynamic vehicles, it gives you less wind noise and reduces fuel consumption.
Possibility to choose between 14 different flashing patterns/modes.
Connection through four cables, red (+), black (ground), yellow (change of flashing pattern), white (day/night function).

Supplied with brackets.

Ordered separately:
Remote control: Art. no. 584949.
Simple holder for remote control: Art. no. 584949H