This cable can be used to extend the BMS communication cables between a Lithium Battery Smart and the BMS.

This cable can be used to extend the BMS communication cables between a Lithium Battery Smart and the BMS.

This cable can be used to extend the BMS communication cables between a Lithium Battery Smart and the BMS.

This cable can be used to extend the BMS communication cables between a Lithium Battery Smart and the BMS.

The M6/M8 eyelet connector with fuse is an accessory for the Blue Smart IP65 Charger with DC connector.

SmartShunt is an all-in-one battery monitor, only without a display. Your phone acts as a display. SmartShunt connects via Bluetooth to the VictronConnect app on your phone (or tablet), and you can easily read all monitored battery parameters such as charge status, time to work, historical information, and more.

Alternatively, SmartShunt can be connected and read with a GX device. The connection to SmartShunt is made using a VE.Direct cable.

SmartShunt is a good alternative to a BMV battery monitor, especially for systems that require battery monitoring but require less wiring and clutter.
SmartShunt is equipped with Bluetooth, VE.Direct port and connection, which can be used for: monitoring the second battery, monitoring the midpoint or the temperature sensor.

The Maxi GX is a member of the GX Product family. The GX-device lies at the heart of the system - providing monitoring, and operating as the communication-centre of your installation.

Compared to the other GX devices, the Maxi GX has most CPU power and most VE.Direct ports: 25. This is the GX device to use for large systems with many VE.Direct MPPT Solar Chargers.

The Multi RS Solar 48/6000 is a 48V 6kVA Inverter/Charger with two independent 3kWp PV 450V MPPT tracker inputs for 6kWp PV total.
Thanks to high frequency technology and a new design this powerful inverter weighs only 11kg. In addition to this it has an excellent efficiency, low standby power, and a very quiet operation.
The display reads battery, inverter and solar parameters. The same parameters can be accessed with a smartphone or other Bluetooth enabled device, using the VictronConnect app.

For 12 V batteries. Output power: 2000 VA. Charging current: 80 A and 1 A. AC current: 35 A.
MultiPlus is a powerful true sine wave inverter, a sophisticated battery charger that features adaptive charge technology and a high-speed AC transfer switch in a single compact enclosure. Up to six Multis can operate in parallel to achieve higher power output. In addition to parallel connection, three units can be configured for three-phase output. Also PowerControl for dealing with limited generator, shore side or grid power and PowerAssist for boosting the capacity of shore or generator power.

The MultiPlus, as the name suggests, is a combined inverter and charger in one elegant package. Its many features include a true sine wave inverter, adaptive charging, hybrid PowerAssist technology, and several system integration features.

Use this cable to connect the following products to the VE.Bus BMS:
- Skylla-TG all models
- Battery Protect models BP40i, BP60i and BP200i (all discontinued).
The cable translates the remote on/off driver logic from the VE.Bus BMS (normally high, and open circuit in case of alarm) to the logic needed by above products: active pull down to switch off.

DC-DC converter for powering of 24 V appliances from 12 V supply. Overload and overheating protection. Completely encapsulated: waterproof, shockproof and ignition protected. Water, oil or dirt will not damage the Orion IP67 DC-DC Converter. The casing is made of cast aluminium and the electronics are moulded in resin.

DC-DC converter for powering of 12 V appliances from 24 V supply.
Remote on/off eliminates the need for a high current switch in the input wiring. The remote on/off can be operated with a low power switch or by for example the engine run/stop switch (see manual).

DC-DC converter for powering of 12 V appliances from 24 V supply.
Overload and overheating protection. Completely encapsulated: waterproof, shockproof and ignition protected. Water, oil or dirt will not damage the Orion IP67 DC-DC Converter. The casing is made of cast aluminium and the electronics are moulded in resin.

DC-DC converter for powering of 12 V appliances from 24 V supply.
Overload and overheating protection. Completely encapsulated: waterproof, shockproof and ignition protected. Water, oil or dirt will not damage the Orion IP67 DC-DC Converter. The casing is made of cast aluminium and the electronics are moulded in resin.

DC-DC converter for powering of 12 V appliances from 24 V supply.
Overload and overheating protection. Completely encapsulated: waterproof, shockproof and ignition protected. Water, oil or dirt will not damage the Orion IP67 DC-DC Converter. The casing is made of cast aluminium and the electronics are moulded in resin.

DC-DC converter for powering of 12 V appliances from 24 V supply.
Overload and overheating protection. Completely encapsulated: waterproof, shockproof and ignition protected. Water, oil or dirt will not damage the Orion IP67 DC-DC Converter. The casing is made of cast aluminium and the electronics are moulded in resin.

DC-DC converter for powering of 12 V appliances from 24 V supply.
All models with adjustable output can also be used as a battery charger. For example, to charge a 12 Volt starter or accessory battery in an otherwise 24V system. All models with adjustable output can be paralleled to increase output current. Up to five units can be connected in parallel.
Remote on/off eliminates the need for a high current switch in the input wiring. The remote on/off can be operated with a low power switch or by for example the engine run/stop switch (see manual).

DC-DC converter for powering of 24 V appliances from 12 V supply.
All models with adjustable output can also be used as a battery charger. For example, to charge a 24 Volt starter or accessory battery in an otherwise 12 V system. All models with adjustable output can be paralleled to increase output current.
Up to five units can be connected in parallel.

DC-DC converter for powering of 24 V appliances from 12 V supply.
All models with adjustable output can also be used as a battery charger. For example, to charge a 24 Volt starter or accessory battery in an otherwise 12 V system. All models with adjustable output can be paralleled to increase output current. Up to five units can be connected in parallel.
Remote on/off eliminates the need for a high current switch in the input wiring. The remote on/off can be operated with a low power switch or by for example the engine run/stop switch (see manual).