The VE.Direct to USB interface connects products with a VE.Direct connection to devices with a USB C port, for example a computer.

The VE.Direct to USB interface connects products with a VE.Direct connection to devices with a USB port, for example a computer. With this cable it is also possible to connect more than two VE.Direct products to a single CCGX.

VE.Net GMDSS panel remotely monitors the Victron Skylla-TG GMDSS charger.

The Venus GX is the communication-centre of your installation. Venus allows you to talk to all components in your system and ensure they are working in harmony. Monitoring of live data, and changing settings is performed by using your smartphone (or other device) via Victron Remote Management Portal.

The EV Charging Station has three-phase and single-phase capabilities. It delivers a maximum of 22kW AC in three-phase or 7.3kW in single-phase mode.

It has a built-in LCD touch screen for monitoring and control directly from the charging station. Initial setup, configuration and monitoring is done from VictronConnect via Bluetooth and/or the integrated web interface via a WiFi Access Point or a WiFi LAN.

The EV Charging Station can be fully integrated with and remotely controlled via a Victron Energy GX Device and VRM.


Not only does this EV Charging Station fully integrate with a Victron Energy GX device and VRM, if you have solar (within the Victron ecosystem), it can also be set up to allow excess energy from the sun to directly charge your vehicle. Manual and scheduled modes offer even more flexibility to respond to the needs of the EV depending on the system.


It has a fully programmable RGB light ring around the charging port that displays different light effects depending on the current status (disconnected, charging, charged, etc.) to quickly determine the device status.

The EV Charging Station NS has three-phase and single-phase capabilities. It delivers a maximum of 22kW AC in three-phase or 7.3kW in single-phase mode.

The device is technically identical to the EV Charging Station, but with a new, modern design available in 3 colours and without the built-in LCD screen. Initial setup, configuration and monitoring is done from VictronConnect via Bluetooth and/or the integrated web interface via a WiFi Access Point or a WiFi LAN.

The charger can be fully integrated with and remotely controlled via a Victron Energy GX Device and VRM.

Not only does this EV Charging Station NS fully integrate with a Victron Energy GX device and VRM, if you have solar (within the Victron ecosystem), it can also be set up to allow excess energy from the sun to directly charge your vehicle. Manual and scheduled modes offer even more flexibility to respond to the needs of the EV depending on the system.

It has a fully programmable RGB light ring around the charging port that displays different light effects depending on the current status (disconnected, charging, charged, etc.) to quickly determine the device status.

Kabelis, lai savienotu Digital Multi Control, Phoenix Inverter Control, Interface MK3-USB, VE.Bus savienojumus starp vairākām VE.Bus ierīcēm un lai izveidotu VE.Bus un VE.Can savienojumus ar GX ierīci.

The charger cable with clamp connectors (with fuse) is an accessory for the Blue Power IP65 Chargers and the Blue Smart IP65 Chargers. Cable length 40 cm.

Easily attach the BMV, MPPT and Color Control GX control panels to the wall

EV Charging station NS itself must be purchased separately.

SmartShunt is an all-in-one battery monitor, only without a display. Your phone acts as a display. SmartShunt connects via Bluetooth to the VictronConnect app on your phone (or tablet), and you can easily read all monitored battery parameters such as charge status, time to work, historical information, and more.

Alternatively, SmartShunt can be connected and read with a GX device. The connection to SmartShunt is made using a VE.Direct cable.

SmartShunt is a good alternative to a BMV battery monitor, especially for systems that require battery monitoring but require less wiring and clutter.
SmartShunt is equipped with Bluetooth, VE.Direct port and connection, which can be used for: monitoring the second battery, monitoring the midpoint or the temperature sensor.

SmartShunt is an all-in-one battery monitor, only without a display. Your phone acts as a display. SmartShunt connects via Bluetooth to the VictronConnect app on your phone (or tablet), and you can easily read all monitored battery parameters such as charge status, time to work, historical information, and more.

Alternatively, SmartShunt can be connected and read with a GX device. The connection to SmartShunt is made using a VE.Direct cable.

SmartShunt is a good alternative to a BMV battery monitor, especially for systems that require battery monitoring but require less wiring and clutter.
SmartShunt is equipped with Bluetooth, VE.Direct port and connection, which can be used for: monitoring the second battery, monitoring the midpoint or the temperature sensor.