DC-DC Converter for charging a 12 or 24V service battery in vehicles with an intelligent dynamo.
The Buck-Boost DC-DC Converter is a DC-DC converter for charging a 12 or 24V service battery in vehicles with an intelligent dynamo. Since, when the engine is running, these dynamos (powered by the on-board electronics of Euro 5 and 6 engines) do not always emit the correct charging current, a DC-DC converter is essential for charging the service battery properly.

DC-DC Converter for charging a 12 or 24V service battery in vehicles with an intelligent dynamo.
The Buck-Boost DC-DC Converter is a DC-DC converter for charging a 12 or 24V service battery in vehicles with an intelligent dynamo. Since, when the engine is running, these dynamos (powered by the on-board electronics of Euro 5 and 6 engines) do not always emit the correct charging current, a DC-DC converter is essential for charging the service battery properly.

DC-DC Converter for charging a 12 or 24V service battery in vehicles with an intelligent dynamo.
The Buck-Boost DC-DC Converter is a DC-DC converter for charging a 12 or 24V service battery in vehicles with an intelligent dynamo. Since, when the engine is running, these dynamos (powered by the on-board electronics of Euro 5 and 6 engines) do not always emit the correct charging current, a DC-DC converter is essential for charging the service battery properly.

DC-DC converter for powering of 24 V appliances from 12 V supply. Overload and overheating protection. Completely encapsulated: waterproof, shockproof and ignition protected. Water, oil or dirt will not damage the Orion IP67 DC-DC Converter. The casing is made of cast aluminium and the electronics are moulded in resin.

DC-DC converter for powering of 12 V appliances from 24 V supply.
Remote on/off eliminates the need for a high current switch in the input wiring. The remote on/off can be operated with a low power switch or by for example the engine run/stop switch (see manual).

DC-DC converter for powering of 12 V appliances from 24 V supply.
Overload and overheating protection. Completely encapsulated: waterproof, shockproof and ignition protected. Water, oil or dirt will not damage the Orion IP67 DC-DC Converter. The casing is made of cast aluminium and the electronics are moulded in resin.

DC-DC converter for powering of 12 V appliances from 24 V supply.
Overload and overheating protection. Completely encapsulated: waterproof, shockproof and ignition protected. Water, oil or dirt will not damage the Orion IP67 DC-DC Converter. The casing is made of cast aluminium and the electronics are moulded in resin.

DC-DC converter for powering of 12 V appliances from 24 V supply.
Overload and overheating protection. Completely encapsulated: waterproof, shockproof and ignition protected. Water, oil or dirt will not damage the Orion IP67 DC-DC Converter. The casing is made of cast aluminium and the electronics are moulded in resin.

DC-DC converter for powering of 12 V appliances from 24 V supply.
Overload and overheating protection. Completely encapsulated: waterproof, shockproof and ignition protected. Water, oil or dirt will not damage the Orion IP67 DC-DC Converter. The casing is made of cast aluminium and the electronics are moulded in resin.

DC-DC converter for powering of 12 V appliances from 24 V supply.
All models with adjustable output can also be used as a battery charger. For example, to charge a 12 Volt starter or accessory battery in an otherwise 24V system. All models with adjustable output can be paralleled to increase output current. Up to five units can be connected in parallel.
Remote on/off eliminates the need for a high current switch in the input wiring. The remote on/off can be operated with a low power switch or by for example the engine run/stop switch (see manual).

DC-DC converter for powering of 24 V appliances from 12 V supply.
All models with adjustable output can also be used as a battery charger. For example, to charge a 24 Volt starter or accessory battery in an otherwise 12 V system. All models with adjustable output can be paralleled to increase output current.
Up to five units can be connected in parallel.

DC-DC converter for powering of 24 V appliances from 12 V supply.
All models with adjustable output can also be used as a battery charger. For example, to charge a 24 Volt starter or accessory battery in an otherwise 12 V system. All models with adjustable output can be paralleled to increase output current. Up to five units can be connected in parallel.
Remote on/off eliminates the need for a high current switch in the input wiring. The remote on/off can be operated with a low power switch or by for example the engine run/stop switch (see manual).

RDC-DC converter for powering of 24 V appliances from 12 V supply.

DC-DC converter for powering of 12 V appliances from 48 V supply. Short circuit proof and can be paralleled to increase output current. An unlimited number of units can be connected in parallel. IP43 protection when installed with the screw terminals oriented downwards. Screw terminals - no special tools needed for installation.
Remote on/off eliminates the need for a high current switch in the input wiring. The remote on/off can be operated with a low power switch or by for example the engine run/stop switch (see manual).

DC-DC converter for powering of 12 V appliances from 24 V supply.
All models with adjustable output can also be used as a battery charger. For example, to charge a 12 Volt starter or accessory battery in an otherwise 24V system. All models with adjustable output can be paralleled to increase output current.
Up to five units can be connected in parallel.
Remote on/off eliminates the need for a high current switch in the input wiring. The remote on/off can be operated with a low power switch or by for example the engine run/stop switch (see manual).

DC-DC converter for powering of 12 V appliances from 12 V supply. Short circuit proof and can be paralleled to increase output current. An unlimited number of units can be connected in parallel. IP43 protection when installed with the screw terminals oriented downwards. Screw terminals - no special tools needed for installation.
Remote on/off eliminates the need for a high current switch in the input wiring. The remote on/off can be operated with a low power switch or by for example the engine run/stop switch (see manual).
Input fuse on 12V and 24V input models only.

DC-DC converter for powering of 12 V appliances from 12 V supply. Short circuit proof and can be paralleled to increase output current. An unlimited number of units can be connected in parallel. IP43 protection when installed with the screw terminals oriented downwards. Screw terminals - no special tools needed for installation.
Remote on/off eliminates the need for a high current switch in the input wiring. The remote on/off can be operated with a low power switch or by for example the engine run/stop switch (see manual).
Input fuse on 12V and 24V input models only.

DC-DC converter for powering of 24 V appliances from 12 V supply. Short circuit proof and can be paralleled to increase output current. An unlimited number of units can be connected in parallel. IP43 protection when installed with the screw terminals oriented downwards. Screw terminals - no special tools needed for installation.
Remote on/off eliminates the need for a high current switch in the input wiring. The remote on/off can be operated with a low power switch or by for example the engine run/stop switch (see manual).
Input fuse on 12V and 24V input models only.

DC-DC converter for powering of 24 V appliances from 12 V supply. Short circuit proof and can be paralleled to increase output current. An unlimited number of units can be connected in parallel. IP43 protection when installed with the screw terminals oriented downwards. Screw terminals - no special tools needed for installation.
Remote on/off eliminates the need for a high current switch in the input wiring. The remote on/off can be operated with a low power switch or by for example the engine run/stop switch (see manual).
Input fuse on 12V and 24V input models only.

DC-DC converter for powering of 24 V appliances from 12 V supply. Short circuit proof and can be paralleled to increase output current. An unlimited number of units can be connected in parallel. IP43 protection when installed with the screw terminals oriented downwards. Screw terminals - no special tools needed for installation.
Remote on/off eliminates the need for a high current switch in the input wiring. The remote on/off can be operated with a low power switch or by for example the engine run/stop switch (see manual).
Input fuse on 12V and 24V input models only.